The Titan Controls Atlas 1 – CO2 Monitor/Controller with Remote Sensor has many features including an adjustable set point and elevation levels, self-calibration capabilities, and built-in photocell for daytime operation only. Includes a 25 ft remote sensor. This sensor comes pre-calibrated for precise CO2 readings. There is low voltage settings to ensure that it avoids RFI from electronic ballasts. The monitor/controller has an adjustable CO2 set point, elevation settings, and calibration features. These changes can be made using the increase/decrease buttons on the front of the controller. System features photocell which senses day/night conditions. At night the system will stop since CO2 enrichment is only useful in the day time. (Product details: -Infrared diffusion -Measurement range: 330 PPM to 5100 PPM -Control range: 0 PPM to 2050 PPM -Accuracy +/- 5% -45 second response time -CO2 PPM reading refreshed every 3 seconds -30 minutes warm-up time -Calibrate every 3 years -Input voltage 120 VAC -Output voltage 120 VAC -15 AMP maximum)
