15.HX is a closed-loop, passive recovery hydrocarbon extractor capable of processing up to 30 lbs . per hour. Dual 6” x 36”pressure-rated material columns and jacketed solvent vessel can be cooled using traditional chillers , CO2, or liquid nitrogen. System features in-line CRC with 60 lbs. stainless steel jacketed surge tank. Tube-in-shell falling film recovery system with molecular sieves for fresh biomass processing. All Decimal systems are constructed using the highest quality materials available, resulting in the industry’s only Lifetime Warranty.
Process up to 250lbs. of biomass in 24 hours
• Fully jacketed material column and solvent vessel
• In-line CRC with 60 lbs. surge tank
• Falling Film recovery up to 2 lbs./min.
• Built-in molecular sieves for moisture removal
• Secondary access ports allow for distillation of solvents, rapid depressurization in case of emergency, and continuous flow processing
• Integrated solvent vessel load sensors eliminate need for C1D1 scale
• Internal temperature probes and C1D1 gauges enable precise temp monitoring and control
• On-site training and installation included
• Peer reviewed, 50 state compliant, C1D1 compliant, ASME certified
Jacketed Material Column
(2) 6”x 36” 5-7 lbs. capacity ea., (incl. valves, sight glasses, PRVs, gauges and thermocouples) Jacketed Solvent Tank
60 lbs. (butane) rated at 80% capacity per ASME (incl. valve, sight glass, PRV, gauge, temp coil, thermocouple sensor), 70 L total volume Jacketed Surge Tank
60 lbs. capacity (incl. valves, sight glass, PRVs and gauges), 70 L total volume Falling Film Recovery
2 lbs./min. tube in shell, molecular sieves CRC
4″ x 32″ column (valves, sights glasses, PRVs, gauges) Tubing
PTFE/SS feed hosing (UL-21 compliant)
Dimensions (approx.) 82” Lx32” Wx70” H Working Area 75 sq. ft. Vacuum Welch CRVPro 8 Explosion Proof Warranty** Lifetime Warranty against pitting or corrosion. Gauges, gaskets, valves 1 Year
Solvents Butane, Propane, Isobutane Recovery Method Passive Per Hour Processing Approx 30 lbs. Cycle Time Approx. 30 minutes (Note: Runtimes vary according to factors such as solvent blend, operating temps, solvent to material ratio, other factors) Capacity Approx. 250 lbs. per 8 hour shift Solvent Recovery Rate 1-2 lbs. per minute Peer Reviewed Pressure Safety Inspectors Certifications Meets or exceeds all industry listed standards for: ASME Section VIII, GMP, IFC 3904.4, NFPA 1: 38.6.1.5.6.1, 3-A Sanitary Standard, Class 1 Division 1, NSF and UL21. C1D1
