(844) 404-4588
24/7 Customer Support
Beaker & Wrench Dual Stage Gen 3 6″ WFE + 40L Decarb Reactor COMBO
$370,000.00
Pictures & Spec for Reference – Call for Details
6” Stainless Steel Wiped-Film Evaporator
- Delivers greater consistency, purity, and confidence in every oil distillation.
- Continuous flow leaves behind less advanced and efficient methods with a dependable input up to 7 liters per hour.
Throughput capability
- Up to 7.0 L/hr
- Average 3.0-5.0 L/hr
True Continuous Feed
- Feed tank (material, volume, heater temperature, ect.)
-
- 40L Holding Vessel
- 120v UR Recognized Heat Pad
-
- Feed pump (rate range, heater power)
- Gear Pump
- 24vdc
- 120v UR Recognized Heat Pad
- Feed hose(power)
- 7’ length
- 120v
- Amps: 4.43
- K-Type Thermocouple
- Working Pressure: 1875 PSI
- Outlet pumps allow dispensing of products directly into vessel of choice
- Feed rates adjustable from 10mL to 10L/hr
Jacketed body
• Thermal fluid circulating through jacketed body for consistent temperature
- Body (surface area, material, oil jacketed)
- .25m^2 of Evaporation Area/Surface Area
- 316 Stainless Steel
- Jacketed, approximately 5 gallons holding capacity including circulator tank
Precise temperature control
• PID temperature controllers on body and all heated lines for creation of precise SOPs
Expert On-Site Training and Installation
- Validation with YOUR oil on the day of install
- Consultation on how to generate the best SOP for your lab
- Sample SOP provided for internal use
Potency up to 99.8% total cannabinoid content
Feed
- 5L or 20L stainless steel feed flask with vacuum inlet line
- Peristaltic dosing pump for precise, vacuum-held dosing
- Feed line to evaporator is jacketed and PID controlled
Short-Path Evaporator
- Max evaporator temperature: 200 °C
- 316 Stainless Steel
- 316 Stainless Steel Internal condenser (cold finger)
- 6 rollers
- Easy to adjust drive system speed
Distillate & Residue Discharge Pumps (2 pumps)
- Gear pump in PID controlled heated design (design temperature 100°C), digitally displayed pump speed. Calibration and secret menu options for optimal SOP development
- Check valves used as a pressure lock against the atmosphere
Vacuum System
- 21 to 36 CFM Rotary Vane Vacuum pump equipped with vacuum pump oil
- Diffusion vacuum pump for achieving stable vacuum conditions at low pressures (oil included)
- Flanged cold trap & collection vessel for cold trap
Heating & Cooling by Beaker & Wrench/ Polyscience
- 1 independent heating unit for the evaporator (oil circulator)
- 1 independent heating unit (silicone pad) for the residue & distillate line
- 1 independent heating unit for the feed tank (silicone pad)
- 1 independent cooling unit for the cold trap (immersion probe)
- 1 independent chilling unit for the internal condenser (water circulator)
Rack/Frame
• Frame constructed of 80/20 aluminum extrusion and equipped with 4 wheels Power supply & power distribution system 1. Voltage: 120V or 220V
• Frequency: 60 Hz 3. Number of Phases: 1 (two hot wires) • Power distribution panel
• Control panel for pumps. Included spare parts.
• 1 set of rollers
• 1 set of static gaskets
• 1 set of shaft sealing for rotary transmission • 1 set of bearings for rotary transmission
• 1 set of O-rings
Documentation
• Operating instructions
Component Certifications See Below
- Heaters & Chillers CE/ISO9001
- Vacuum Pumps
- Gear Pumps
- Wiper Drive
- Power Box
- Frequency Box
- Pressure Gauge
Decarboxylation Reactor
Beaker & Wrench’s Decarboxylation Reactor performs complete decarboxylation of 40L of crude in 3hrs. It has the ability to remove light and medium weight terpenes under vacuum, making the terpene stripping portion of distillation extremely efficient. Our decarb machine includes an overhead mixer and a programmed VFD for stirring and foaming prevention. An overflow sensor/blow off valve is included and allows the operator to ‘set and forget.’ Loading and unloading material can be done through ports utilizing the 5-way valve control. A Clean In Place process is part of the hardware design, making it easier than ever to cleanse and preserve your decarboxylation equipment.
Specifications:
- 56L total capacity (40L recommended max fill for decarboxylation)
- Single Nema 14-30 plug (30amp, 230v circuit)
- 3Kw heater
- 3/4 hp Stirring Motor
- 2.3CFM chemical duty vacuum pump, 25torr ultimate vacuum
