Explosion-proof, Class I, Division 1, 2-tube Interior LED Light Fixtures
Fire-rated door and exit hardware
Extra-long life, flammable gas infrared sensor
Supply and Exhaust Ventilation Assemblies – Includes exhaust and supply fans built with explosion-proof construction and CID1 motor assembly
Exterior CID2 remote operator switch
Interior CID1 manual purge button
110W Uninterrupted Power Supply (UPS) – upgraded UPS options available to back up the entire booth system
36” wide personnel door sealed by a rubber compression gasket
Cross-capture ventilation
A fire-rated panic bar for emergency exiting
Professional engineer peer-reviewed design
UL Certification *Not available for booth configurations
Exterior CID2 tri-color light alarm and exterior warning siren / Light alarm and siren set to go off at 10% and 25% of LEL, respectively
Fully compliant with applicable OSHA, NFPA, NEC regulations
Access Panel with Utility Penetration Plate to easily run heating, cooling, and air lines to approved extraction equipment located inside of the HAL Booth
Compliance
UL CERTIFIED
The First and Only UL Certified Extraction Booths
The use of flammable and pressurized solvents can create dangerous conditions for workers and buildings. HAL Extraction has worked with Underwriters Laboratories (UL) to develop and certify the first equipment for use in the plant oil extraction industry.
PEER-REVIEWED
HAL Extraction Product Lines Achieves PSI Technical Report Certification in 50 States
HAL Extraction Booths and Hoods have been Peer-reviewed by Pressure Safety Inspectors (PSI)
Configurations
Classic Series CID1 Booths
HAL Extraction Class 1, Division 1 Extraction Booths are designed for use with class IA flammable liquids in hydrocarbon extraction methods.
Classic Series CID2 Booths
HAL Extraction Class 1, Division 2 Extraction Booths are designed for use with class IB flammable liquids in ethanol extraction methods.
Degassing Cabinet
HAL’s Degassing Cabinet is an independent space that works in conjunction with the HAL Extraction Booth during the plant oil extraction process.
It was created to safely off-gas used plant material still wet with solvents in a contained area, without compromising the safety of your CID1 space.
