Rose Scientific – CAT hand held, high speed Model X120 Homogenizer Motor
- Hand-held high-speed drive motor
- Electronic speed control from 5,000 – 35,000 rpm
- Accepts dispersing tools up to 17 mm in diameter, T-6, T-10 and T-17
- For small volumes of 0.1 to 1,000 mL
Call to Customize
Model X120 hand-held high-speed drive motor with electronic speed control, 5,000 – 35,000 rpm for small volumes of 0.1 to 1,000 mL, accepts dispersing tools up to 17 mm in diameter, T-6, T-10 and T-17
The CAT dispersing tools and generators have unique slanted rotor slots for fast processing and improved mixing turbulence. The dispersing tools are interchangeable and some (G20, G30, G40) have ceramic shaft seals, so they can be used under vacuum, pressure and abrasive materials. Rotors and stators are exchangeable and there are optional continuous flow chambers (DK30 and DK40) as well as a DK 40 Kit, which consists of drive unit X1740, a flow-through chamber with external cooling, bench mounting device and a G 40 generator.
All CAT disbursing shafts have the same coupling system, allowing all the drive motors to accept any choice of suitable shafts.
T17 Tool, F Generator | T17 Tool, N Generator | T17 Tool, V Generator | T17 Tool, M Generator |
Dispersing tools are sold complete with rotor and stators as F (fine viscosity), N (low viscosity), V (medium viscosity) F and M (knife version) types. Different rotors and stators are available to interchange. Replacement rotors and stators are available for all types of dispersing tools such as T-6, T-10, T-17, T-20, T-30 and T-40.
The T series tools have a Teflon bearing. Please enquire for more details about the ceramic sealed G-20, G-30 and G-40 tools, for use under vacuum, pressure or with abrasive materials.
See Options Below:
60422-000 | T-20 Dispersing Tool shaft only, without generator | |
60422-000V | T-20 Dispersing Tool with V Type Generator, 10 – 2,000 mL | |
60422-000N | T-20 Dispersing Tool with N Type Generator, 10 – 2,000 mL | |
60422-000F | T-20 Dispersing Tool with F Type Generator, 10 – 2,000 mL | |
60422-000M | T-20 Dispersing Tool with M Type Generator, 10 – 2,000 mL | |
60423-000 | G-20 Dispersing Tool shaft only, without generator | |
60423-000V | G-20 Dispersing Tool with V Type Generator, 10 – 2000 mL | |
60423-000N | G-20 Dispersing Tool with N Type Generator, 10 – 2000 mL | |
60423-000F | G-20 Dispersing Tool with F Type Generator, 10 – 2000 mL | |
60423-000M | G-20 Dispersing Tool with M Type Generator, 10 – 2000 mL | |
60414-000 | T-30 20mm Ø Dispersing Tool shaft only, without generator | |
60427-000V | T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with V Type Generator, 30 – 5,000 mL | |
60427-000N | T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with N Type Generator, 30 – 5,000 mL | |
60427-000F | T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with F Type Generator, 30 – 5,000 mL | |
60415-000 | G-30 20mm Ø Dispersing Tool shaft only, without generator | |
60428-000V | G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with V Type Generator, 30 – 5,000 mL | |
60428-000N | G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with N Type Generator, 30 – 5,000 mL | |
60428-000F | G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with F Type Generator, 30 – 5,000 mL | |
60428-000M | G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with M Type Generator, 30 – 5,000 mL | |
60414-000 | T-40 20mm Ø Dispersing Tool shaft only, without generator | |
60414-000V | T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with V Type Generator, 100 – 20,000 mL | |
60414-000N | T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with N Type Generator, 100 – 20,000 mL | |
60414-000F | T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with F Type Generator, 100 – 20,000 mL | |
60414-000M | T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with M Type Generator, 100 – 20,000 mL | |
60415-000 | G-40 20mm Ø Dispersing Tool shaft only, without generator | |
60415-000V | G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with V Type Generator, 100 – 20,000 mL | |
60415-000N | G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with N Type Generator, 100 – 20,000 mL | |
60415-000F | G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with F Type Generator, 100 – 20,000 mL | |
60415-000M | G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with M Type Generator, 100 – 20,000 mL |
60428 | DK30 Stainless steel flow-through chamber for shaft G20 and G30, high continuous flow-rate up to 2,000 L/hr, for use with Unidrive 1000D Series (with G20) or X 1740 (with G30) | |
60429-000 | DK40 Stainless steel flow-through chamber, without generator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740 | |
60429-000F | DK40 Stainless steel flow-through chamber, with G40 generator and F Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740 | |
60429-000V | DK40 Stainless steel flow-through chamber, with G40 generator and V Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740 | |
60429-000N | DK40 Stainless steel flow-through chamber, with G40 generator and N Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740 |
18900131 | Plate Stand with Support Rod, base is 12 x 8 inches and the rod is 31 inches in height | |
A113 | H- Base Stand complete with Rod, base accommodates a central 25 mm (1”) diameter stand rod of length 960 mm (38”) | |
60494 | U-Stand (suitable for Unidrive X-1000 and X-1000D Models) | |
60492 | Cross Over Clamp | |
60495 | Special Cross Clamp for use with X-1740 Homogenizer | |
60470-000 | Universal Rotor Wrench, for all shafts 6 to 30mm, except G30 and T30 with M Type generator | |
60471-000 | Socket Wrench for all shafts, 6 to 40 mm diameter |
60473-000 | Rotor Wrench for T 20 or G 20 | |
60476-000 | Rotor Wrench for T 30 or G 30 | |
60477-000 | Rotor Wrench for T 40 or G 40 |